- New
Long cylindrical sleeve and reduction ring, machined with high precision, designed for lining long bores, continuous linear guidance, and diameter fitting on demanding mechanical assemblies.
Type of part: Long cylindrical spacer / Reinforced reduction sleeve
Inner diameter: 12mm
Outer diameter: 20mm
Wall thickness: 4mm
Total length: 260mm
Calibration tolerance: +/- 0.02mm (ensuring a smooth/sliding fit without hard points)
Material: Mechanical steel
Surface treatment: Electrolytic zinc plating (corrosion protection)
Straightness and long span: Over a length of 260mm with a thick wall of 4.0mm, the tight calibration of 0.02mm maintains constant concentricity and linearity throughout the span, eliminating any risk of binding or buckling under axial load.
Ready to mount or cut: Usable directly as a long guiding sleeve between a shaft of 12mm and a bore of 20mm, or as a calibrated bar ready to cut to size according to workshop needs, without prior re-boring.
Typical applications: Lining long shafts, spindles and drive shafts, linear guidance, spacing of frames, tooling for reworking and industrial maintenance.
You might also like